ICON 2020+ Jeep Gladiator JT 1.5in Rear 2.5 Series Shocks VS PB CDEV – Pair Buy Today

Description

Manufacturer Part # : 27727EP

Market Description

• Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
• ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks with CDEV are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. For piggyback and specific remote reservoir applications, ICON’S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. Like all ICON’S Shock Absorbers, V.S. 2.5 Aluminum Series shocks with CDEV are 100% rebuildable and 100% revalveable.

Product Description – Extended

• ICON 2.5 Aluminum Series shocks with CDEV are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured for each application in both length and damping tune.
• 2020-UP JEEP GLADIATOR JT 1.5″ LIFT REAR 2.5 VS PIGGYBACK CDEV SHOCK PAIR

Associated Comments

• TECH NOTE: Rear shocks require sway bar relocation kit (Part #22062) or sway bar link kit (Part #22070) to be used in conjunction with JT coil spacer (Part #22065) or JT coil spring (Part #22066)
• TECH NOTE: Also requires installation of IIC kit (Part # 23502) and CDEV front shocks (Part # 27821EP)
• TECH NOTE: An iOS operated device is required to run ICON Intelligent Control App
• TECH NOTE: Only fits models equipped with 3.6L “Pentastar” V6 gasoline engine.
• TECH NOTE: Only compatible with models equipped with 3.6L V6 gasoline engine

Features and Benefits

• ICON’s CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
• One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
• ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
• One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
• Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
• Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
• PTFE lined spherical bearings and application specific mounting hardware
• 7/8” diameter induction hardened, chrome plated shock shaft
• Nitrogen charged monotube design with piggyback reservoir
• 6061 aircraft grade aluminum CNC machined components
• Protective shin guards standard with every shock
• 100% Revalveable
• 100% Rebuildable

Product Description – Short

• ICON 2020+ Jeep Gladiator JT 1.5in Rear 2.5 Series Shocks VS PB CDEV – Pair
• SHOCK ABSORBER PAIR
• 2.5 SHOCKS W/ CDEV

Product Description – Long

• 20-UP JT 1.5″ REAR 2.5 VS PB CDEV PAIR
• 20-23 JT 1.5″ REAR 2.5 VS PB CDEV PAIR

Product Description – Invoice

• JT 1.5″ REAR 2.5 VS PB CDEV PAIR
• 27727EP

AAIA Part Type Description

Suspension Shock Absorber Set

“>